Trace analysis of Pt (IV) metal ions in roadside soil and water samples by Fe3O4/graphene/polypyrrole nanocomposite as a solid-phase extraction sorbent followed by atomic absorption spectrometry

A novel Fe₃O₄/graphene/polypyrrole nanocomposite has been successfully synthesised via a simple chemical method and applied as a new magnetic solid-phase extraction (MSPE) sorbent for the separation and pre-concentration of trace amounts of Pt (IV) in environmental samples followed by flame atomic absorption spectrometric (FAAS) detection. The nanocomposite has been characterised by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Fourier transform infrared (FTIR) spectroscopy. Seven important parameters, affecting the extraction efficiency of Pt (IV), including pH, adsorption time, desorption solvent type and concentration, desorption time, elution volume and sample volume, were investigated. Under the optimised conditions, the calibration graph was linear in the range of 50–1500 μg L^?1 (R = 0.993). The detection limit and pre-concentration factor (PF) for Pt (IV) were found to be 16 μg L^?1 and 112.5, respectively. Under the optimised solid-phase extraction (SPE) conditions, the adsorption isotherm and the adsorption capacity of the nanocomposite for Pt (IV) were studied. Pt (IV) adsorption equilibrium data were fitted well to the Langmuir isotherm and the maximum adsorption capacity of the magnetic sorbent was calculated from the Langmuir isotherm model as 416.7 mg g^?1. The precision of the method was studied as intraday and interday variations. A relative standard deviation percentage (RSD%) value less than 3.0 indicates that the method is precise. Also, the accuracy of the method was tested by the analysis of the standard reference material (NIST SRM 2556) and by recovery measurements on spiked real samples. It was also shown that the optimised method was suitable for the analysis of trace amounts of Pt (IV) in roadside soil, tap water and wastewater samples.     

Adsorption of Propene on Neutral Gold Clusters in the Gas Phase

The adsorption of propene on neutral gold clusters is investigated in a collision cell under a few collision conditions. The adsorption reaction is studied by pressure‐dependent kinetic measurements and delayed unimolecular dissociation of the excited Au_n?propene complexes. The cluster size (n=9–25) and temperature (T=90–300 K) dependence of the propene adsorption is analyzed. Strong size dependences of the absorption reaction are observed; a larger propene adsorption probability was found for gold clusters composed of an even number of atoms. Propene binding energies are estimated by comparison of the temperature‐dependent unimolecular dissociation rates with rates obtained by using statistical RRKM modeling. The Au_n–propene binding energies decrease non‐monotonously with cluster size and are in the range of 1.2–0.85 eV for n=9–25. Finally, the bonding of C₃H₆ on Au_n is qualitatively described and similarities with the absorption of CO molecules on gold clusters are discussed.     

界面扩张流变法研究C12mimBr对Gemini12-2-12在空气/水界面聚集行为的影响

采用界面扩张流变技术研究了季铵盐偶联表面活性剂C₁₂-(CH₂)₂-C₁₂·2Br (Gemini12-2-12)及其与离子液体表面活性剂溴化1-十二烷基-3-甲基咪唑(C₁₂mimBr)复配体系的动态界面张力、扩张流变性质和界面弛豫过程等, 探讨了C₁₂mimBr 对C₁₂mimBr/Gemini12-2-12 混合体系界面性质的影响及C₁₂mimBr 对Gemini12-2-12界面聚集行为影响的机制. 结果表明, 随着离子液体表面活性剂的不断引入, 体系界面吸附达到平衡所需的时间逐渐缩短, 扩张模量和相角明显降低, 界面吸附膜由粘弹性膜转变为近似纯弹性膜; 同时, 界面及其附近的弛豫过程也发生显著变化, 慢弛豫过程消失, 快弛豫过程占主导地位, 且离子液体浓度越高, 快弛豫的贡献越大. 这些界面性质的变化主要归因于离子液体表面活性剂C₁₂mimBr参与界面形成及两表面活性剂在界面竞争吸附的结果. 少量离子液体表面活性剂C₁₂mimBr 的加入可以填补疏松的Gemini12-2-12 界面上的空位, 形成混合界面吸附膜. 随着C₁₂mimBr 含量的增加, 嵌入界面的C₁₂mimBr 分子数不断增多, 导致界面上相互缠绕的Gemini12-2-12烷基链“解缠”, 在体相和界面分子扩散交换的过程中“解缠”的Gemini12-2-12分子从界面上解吸回到体相, 与此同时, C₁₂mimBr 分子相对较小的空间位阻及较强的疏水作用促使其优先扩散至界面进而取代Gemini12-2-12分子, 最终界面几乎完全被C₁₂mimBr分子所占据.     

Two‐Dimensional Covalent Organic Frameworks for Carbon Dioxide Capture through Channel‐Wall Functionalization

Ordered open channels found in two‐dimensional covalent organic frameworks (2D COFs) could enable them to adsorb carbon dioxide. However, the frameworks’ dense layer architecture results in low porosity that has thus far restricted their potential for carbon dioxide adsorption. Here we report a strategy for converting a conventional 2D COF into an outstanding platform for carbon dioxide capture through channel‐wall functionalization. The dense layer structure enables the dense integration of functional groups on the channel walls, creating a new version of COFs with high capacity, reusability, selectivity, and separation productivity for flue gas. These results suggest that channel‐wall functional engineering could be a facile and powerful strategy to develop 2D COFs for high‐performance gas storage and separation.     

水对Ni/MgAlO催化丙酮加氢的影响

研究了H2O对Ni/MgAlO催化剂上丙酮加氢为异丙醇的催化反应的影响。结果发现,在丙酮中添加少量H2O可提高丙酮转化率,但超过5%的H2O量则会显著降低催化剂活性。吸附量热结果表明,催化剂表面吸附少量H2O会明显降低异丙醇的吸附热,但对丙酮吸附热的影响较小,这也许是反应体系中少量的H2O能促进丙酮加氢活性的原因之一。当催化剂表面吸附较多H2O后,丙酮、异丙醇和H2的吸附热都降低了,因此反而抑制了丙酮的加氢反应。此外,红外光谱结果表明,预吸附水抑制了催化剂表面异丙醇脱氢生成丙酮,并抑制吸附的丙酮在表面生成烯醇盐或异丙叉丙酮等物种,这也许是少量水能促进丙酮加氢生成异丙醇的另一个重要原因。     

Adsorption on Mesoporous Metal–Organic Frameworks in Solution: Aromatic and Heterocyclic Compounds

Adsorption and desorption play major roles in separations, purification of water, waste streams, liquid fuels, catalysis, biomedicine and chromatography. Mesoporous metal–organic frameworks (MOFs) with pore sizes 2–50 nm are particularly suitable for adsorption of organic compounds in solution. Tens of thousands of aromatic and heterocyclic compounds are major components of liquid fuels, feedstock for industrial synthesis, solvents, dyestuffs, agricultural chemicals, medicinal drugs, food additives, and so forth. This Review provides a systematization and analysis of studies on adsorption/desorption on mesoporous MOFs in solution and their underlying chemical mechanisms. The (in)stability of mesoporous MOFs in water is critically discussed. Adsorption capacity and selectivity are covered for organic dyes, medicinal drugs, major components of liquid fuels, and miscellaneous industrial chemicals. Ionic interactions, Brønsted acid–base interactions, hydrogen bonding, coordination bonding, π–π interactions, and non‐specific interactions are covered amongst adsorption mechanisms. The effects of post‐synthetic modifications of mesoporous MOFs on their stability, adsorption capacity, selectivity, and mechanisms of adsorption and desorption are analyzed. To encourage research in this quickly growing field, we identify “niches” for which no application‐oriented and/or mechanistic studies were reported. Perspectives and limitations of a wide use of mesoporous MOFs as industrial sorbents are discussed.     

Cyclotetrabenzoin: Facile Synthesis of a Shape‐Persistent Molecular Square and Its Assembly into Hydrogen‐Bonded Nanotubes

Cyanide‐catalyzed benzoin condensation of terephthaldehyde produces a cyclic tetramer, which we propose to name cyclotetrabenzoin. Cyclotetrabenzoin is a square‐shaped macrocycle ornamented with four α‐hydroxyketone functionalities pointing away from the central cavity, the dimensions of which are 6.9×6.9 Å. In the solid state, these functional groups extensively hydrogen bond, resulting in a microporous three‐dimensional organic framework with one‐dimensional nanotube channels. This material exhibits permanent—albeit low‐porosity, with a Langmuir surface area of 52 m² g^?1. Cyclotetrabenzoin’s easy and inexpensive synthesis and purification may inspire the creation of other shape‐persistent macrocycles and porous molecular crystals by benzoin condensation.     

High Ethene/Ethane Selectivity in 2,2′‐Bipyridine‐Based Silver(I) Complexes by Removal of Coordinated Solvent

Following removal of coordinated CH₃CN, the resulting complexes [Ag^I(2,2′‐bipyridine)][BF₄] ( 1 ) and [Ag^I(6,6′‐dimethyl‐2,2′‐bipyridine)][OTf] ( 2 ) show ethene/ethane sorption selectivities of 390 and 340, respectively, and corresponding ethene sorption capacities of 2.38 and 2.18 mmol g^?1 when tested at an applied gas pressure of 90 kPa and a temperature of (20±1) °C. These ethene/ethane selectivities are 13 times higher than those reported for known solid sorbents for ethene/ethane separation. For 2 , ethene sorption reached 90 % of equilibrium capacity within 15 minutes, and this equilibrium capacity was maintained over the three sorption/desorption cycles tested. The rates of ethene sorption were also measured. To our knowledge, these are the first complexes, designed for olefin/paraffin separations, which have open silver(I) sites. The high selectivities arise from these open silver(I) sites and the relatively low molecular surface areas of the complexes.     

Identification of tert‐Butyl Cations in Zeolite H‐ZSM‐5: Evidence from NMR Spectroscopy and DFT Calculations

Experimental evidence for the presence of tert‐butyl cations, which are important intermediates in acid‐catalyzed heterogeneous reactions, on solid acids has still not been provided to date. By combining density functional theory (DFT) calculations with ¹H/¹³C magic‐angle‐spinning NMR spectroscopy, the tert‐butyl cation was successfully identified on zeolite H‐ZSM‐5 upon conversion of isobutene by capturing this intermediate with ammonia.